BEC Automation › Products › Maisvch MES Series Embedded Industrial Switch
MES5105BP
3x100M optical ports, 2x100M copper ports and 2xRS485/CAN ports,layer 2 Bypass managed ethernet switch for Mining industry
The MES5105BP series is a 5-port Layer 2 100M Bypass managed embedded industrial Ethernet switch designed and developed by Masvich for mining industrial communication network applications, integrating serial device networking or CAN device networking, and with optical port Bypass function. This series of products supports 3*100M optical ports, 2*100M copper ports, 2 RS485 or CAN options, of which the optical port supports 1 group of bypass functions, which can be directly connected after the device is powered off, bypassing the faulty node, avoiding network interruption, and ensuring the normal operation of the network; It supports 1 DC6~32V power input, supports anti-reverse polarity and overcurrent protection, and adopts embedded installation mode to meet the needs of a variety of industrial buses and network sites.
The MES5105BP series supports web management functions and multiple network protocols, such as MW-Ring, STP/RSTP, VLAN, QoS Quality of Service (Quality of Service), port mirroring, static multicast, bus configuration, storm suppression, port statistics, and online firmware upgrade. It supports UDP, TCP Client, TCP Server, UDP multicast and other network transmission modes, realizes the networking of CAN/serial terminal equipment, and supports serial/CAN port statistics; The system provides user management with different permissions, and supports online restart, upgrade, and factory reset. The hardware adopts fan-less, intrinsically safe type, wide temperature design, small size, selected industrial-grade components, supports -40°C~+75°C working temperature, the power supply meets the requirements of intrinsically safe circuit design standards, and passes strict safety regulations and EMC tests to meet the application needs of harsh industrial environments. The products can be widely used in industrial automation, integrated energy, intelligent transportation, smart city, smart mining and other fields.
Port VLANs and 802.1Q VLANs are supported;
Port ingress/egress rate limiting and storm suppression are supported;
MAC address table, received frames, sent frames, and total traffic statistics are supported;
Support QoS Quality of Service, 802.1P/DSCP/Port Priority Mapping, Absolute and Relative Priority Control;
Support statistics on the number of bytes sent and received by serial ports and networks;
Support CAN working modes such as normal mode, monitoring mode, and loopback mode;
Support CAN ID filtering, CAN frame statistics;
Support management of users with different permissions;
Support online reboot, factory reset, system upgrade, configuration file upload/download;
Support unified host computer software management;
The wavelength and transmission distance are optional, and fiber port 1 and fiber port 2 support the bypass function
Connection: 6-position 3.81mm pitch with locking terminal blocks
Termination Resistor: Built-in 120Ω termination resistor, which can be set by jumper cap;
Check digits: None, Odd Check, Even Check, Mark, Space
Termination Resistor: Built-in 120Ω termination resistor, which can be set by jumper cap
Key specifications
- Serial Port: Interface type: 2 RS485 ports are optional Interface signals: A, B, GND Baud rate: 600bps-115200bps Data bits: 7 bits, 8 bits Stop bits: 1 bit, 2 bits Check digits: None, Odd Check, Even Check, Mark, Space Connection: 6-position 3.81mm pitch with locking terminal blocks Termination Resistor: Built-in 120Ω termination resistor, which can be set by jumper cap Isolation voltage: 1.5kVDC
- Input Voltage: DC6~32V
- Redundancy: Support MW-Ring/ MW-RingV2 private ring network technology; Support RSTP and compatible with STP
- EMC: IEC 61000-4-5(Surge): Level 2 ※The network port supports 6kV lightning protection IEC 61000-4-4(EFT): Level 3