BEC Automation › Products › Crevis GN
GN-9251
BACnet/IP Network Adapter
- IAP web-server IP: 192.168.0.100
MOD, LINK, ACTIVE, IOS, System Power, Field Power
Supply voltage : 24Vdc typical (Max. 30Vdc) ***
Distributor - Fieldtec | Industry - Steel Industry | End User - Confidential | Integrator - Confidential | Problem (or Benefit) - Position controller to detect steel sheets and material for consistent positioning - Multiple fieldbus communications required within the position controller - Using an S-brand PLC as master - Remote IO module needed to control IO signals from the position controller | Solution - Proposed MODBUS TCP, MODBUS RTU, PROFINET, PROFIBUS type Network Adapters - Communication modules supporting different protocols | COPYRIGHT © 2021 by CREVIS CO., LTD. ALL RIGHTS RESERVED
Distributor - Fieldtec | Industry - Logistics Automation Process | End User - Confidential | Problem (or Benefit) - IO control for AGV (Automated Guided Vehicle) unmanned transport system in automated factory - IO signal control needed for object input/output between logistics equipment and AGV - PC and M-brand PLC applied as masters - Remote IO module supporting protocols compatible with applied masters required | Solution - Proposed Network Adapter supporting MODBUS TCP, CC-LINK IE Field, and CC-LINK IE Field Basic protocols | COPYRIGHT © 2021 by CREVIS CO., LTD. ALL RIGHTS RESERVED
Distributor - Protech | Industry - Automotive Production Line Robot Application | End User - Confidential | Integrator - Confidential | Problem (or Benefit) - Each factory's assembly line has a designated PLC maker, and Remote IO supplier is determined by that maker - This results in separate IO purchases and inventory per factory, each requiring dedicated maintenance personnel - When problems occur, each factory's maintenance team handles different maker products, requiring retraining or new hiring when designated personnel are absent | COPYRIGHT © 2021 by CREVIS CO., LTD. ALL RIGHTS RESERVED
Key specifications
- Product Certifications CE, UL, UKCA
- Adapter Type Slave node (BACnet/IP)
- BACnet Protocol Version 1
- BACnet Protocol Revision 12
- Sub Protocol MODBUS/TCP,MODBUS/UDP,HTTP,DHCP,10 TCP Connections
- Max Length Bus Line Up to 100m from Ethernet Hub/Switch with twisted CAT5 UTP/STP
- Max. Nodes Limited by Ethernet Specification.
- Baud Rate 10/100Mbps, Auto-negotiation, Full duplex
- Interface Connector RJ-45 socket * 2pcs
- IP-Address Setup Via DHCP/BOOTP or IOGuide(Crevis Software)
- IP-Address Range xxx.xxx.xxx.1 ~ 253
- Serial Port RS232 for MODBUS/RTU, Touch Pannel or IOGuide
- Serial Configuration (RS232) 1 Node, 115200 baud, 8 data bits, no parity, 1 stop bit (Fixed)
- * Only analog I/O module(GT-3xxx,GT-4xxx) and digital I/O module(GT-1xxx,GT-2xxx) are supported.