BEC Automation › Products › Crevis GL
GL-9087
PROFINET NETWORK ADAPTER
Max. Input 128 bytes / Output 128 bytes
When DIP Switch 1 to 8 setting is 254 or 255
1 Green/Red, Module Status(MOD)
1 Green/Red, Network Status(NET)
1 Green/Red, Error Status(ERROR)
1 Green/Red Expansion I/O Module Status(IOS)
Supply voltage range : 15~28.8Vdc
System power to internal logic : Non-isolation System power I/O driver : Isolation
Supply voltage : 24Vdc typical (Max. 30Vdc)
* Field Power Range is different depending on IO Module series.
Distributor - Fieldtec | Industry - Steel Industry | End User - Confidential | Integrator - Confidential | Problem (or Benefit) - Position controller to detect steel sheets and material for consistent positioning - Multiple fieldbus communications required within the position controller - Using an S-brand PLC as master - Remote IO module needed to control IO signals from the position controller | Solution - Proposed MODBUS TCP, MODBUS RTU, PROFINET, PROFIBUS type Network Adapters - Communication modules supporting different protocols | COPYRIGHT © 2021 by CREVIS CO., LTD. ALL RIGHTS RESERVED
Distributor - Fieldtec | Industry - Logistics Automation Process | End User - Confidential | Problem (or Benefit) - IO control for AGV (Automated Guided Vehicle) unmanned transport system in automated factory - IO signal control needed for object input/output between logistics equipment and AGV - PC and M-brand PLC applied as masters - Remote IO module supporting protocols compatible with applied masters required | Solution - Proposed Network Adapter supporting MODBUS TCP, CC-LINK IE Field, and CC-LINK IE Field Basic protocols | COPYRIGHT © 2021 by CREVIS CO., LTD. ALL RIGHTS RESERVED
Distributor - OPCsoft | Industry - Semiconductor Packaging Process | End User - Confidential | Problem (or Benefit) - Reviewing Air Gauge controllable via MODBUS TCP protocol for defect detection and classification on semiconductor PLP line - General Air Gauges rarely support MODBUS and are very expensive - Most devices only support Analog IO, requiring a separate communication module | Solution - Proposed new product with customer-required specifications and features | COPYRIGHT © 2021 by CREVIS CO., LTD. ALL RIGHTS RESERVED
Key specifications
- Profinet Network Adapter
- Product Certifications CE, UL
- Adapter Type Slave node (Profinet)
- Protocol Profinet
- Max Length Bus Line Up to 100m from Ethernet Hub/Switch with twisted CAT5 FTP/STP
- Max. Nodes Limited by Profinet Specification.
- Baud Rate 100Mbps, Auto-negotiation, Full duplex
- Interface Connector RJ-45 socket * 2pcs
- IP-Address Setup Via Master Device Software
- Indicator 4 LEDs; 1 Green/Red, Module Status(MOD); 1 Green/Red, Network Status(NET); 1 Green/Red, Error Status(ERROR); 1 Green/Red Expansion I/O Module Status(IOS); 2 LEDs (each RJ45 Connector); 1 Yellow, Link/Active; 1 Green, Not used
- Current for I/O Module 1.0A @ 5Vdc