BEC Automation › Products › Crevis GL
GL-9084
CC-Link IE Field Basic Network Adapter
Max. link points per station (RWr, RWw)
xxx.xxx.xxx.1 ~ 253 (User area)
When DIP Switch 1 to 8 setting is 254 or 255
1 Green/Red, Module Status (MOD)
1 Green, Physical Connection (NET)
1 Green, Exchange Data/Traffic Present (ERR)
1 Green/Red, Expansion I/O Module Statsus (IOS)
Supply voltage range : 15~28.8Vdc
System power to internal logic : Non-isolation System power I/O driver : Isolation
Supply voltage : 24Vdc typical (Max. 30Vdc)
* Field Power Range is different depending on IO Module series.
Distributor - Fieldtec | Industry - Steel Industry | End User - Confidential | Integrator - Confidential | Problem (or Benefit) - Position controller to detect steel sheets and material for consistent positioning - Multiple fieldbus communications required within the position controller - Using an S-brand PLC as master - Remote IO module needed to control IO signals from the position controller | Solution - Proposed MODBUS TCP, MODBUS RTU, PROFINET, PROFIBUS type Network Adapters - Communication modules supporting different protocols | COPYRIGHT © 2021 by CREVIS CO., LTD. ALL RIGHTS RESERVED
Distributor - Fieldtec | Industry - Logistics Automation Process | End User - Confidential | Problem (or Benefit) - IO control for AGV (Automated Guided Vehicle) unmanned transport system in automated factory - IO signal control needed for object input/output between logistics equipment and AGV - PC and M-brand PLC applied as masters - Remote IO module supporting protocols compatible with applied masters required | Solution - Proposed Network Adapter supporting MODBUS TCP, CC-LINK IE Field, and CC-LINK IE Field Basic protocols | COPYRIGHT © 2021 by CREVIS CO., LTD. ALL RIGHTS RESERVED
Distributor - OPCsoft | Industry - Semiconductor Packaging Process | End User - Confidential | Problem (or Benefit) - Reviewing Air Gauge controllable via MODBUS TCP protocol for defect detection and classification on semiconductor PLP line - General Air Gauges rarely support MODBUS and are very expensive - Most devices only support Analog IO, requiring a separate communication module | Solution - Proposed new product with customer-required specifications and features | COPYRIGHT © 2021 by CREVIS CO., LTD. ALL RIGHTS RESERVED
Key specifications
- CC-Link IE Field Basic Network Adapter
- Product Certifications CE, UL
- Adapter Type Slave station (CC-Link IE Field Basic Server)
- Protocol CC-Link IE Field Basic, SLMP
- Sub-Protocol MODBUS/TCP,MODBUS/UDP,HTTP,DHCP,10 TCP Connections
- Max. Data Size(RX, RY) each 32 bytes (4 Stations occupied)
- Max. Data Size(RWr, RWw) each 256 bytes (4 Stations occupied)
- Max Length Bus Line Up to 100m from Ethernet Hub/Switch with twisted CAT5 UTP/STP
- Max. Nodes 64 node
- Baud Rate 10/100Mbps, Auto-negotiation, Full duplex
- Interface Connector RJ-45 socket * 2pcs
- IP-Address Setup Via DHCP/BOOTP or IOGuide(Crevis Software)
- IP-Address Range xxx.xxx.xxx.1 ~ 253 (User area); xxx.xxx.xxx.254 ~ 255 (Reserved for IAP Function)
- Indicator 4 LEDs; 1 Green/Red, Module Status (MOD); 1 Green, Communication Status (NET); 1 Green/Red, Error Status (ERR); 1 Green/Red, Expansion Module Statsus (IOS); 2 LEDs (each RJ45 Connector); 1 Yellow, Link/Active; 1 Green, Not used
- Current for I/O Module 1.0A @ 5Vdc