BEC Automation › Products › Crevis GL
GL-9041
RTEX with Ethernet Network Adapter
Supply voltage : 24Vdc nominal Supply voltage range : 15~28.8Vdc Reverse polarity protection
Key specifications
- RTEX with Ethernet Network Adapter
- Product Certifications CE, UKCA, UL
- Adapter Type Slave node (RTEX Generic Slave)
- Protocol RTEX
- Sub-Protocol Ethernet for MODBUS TCP / Webserver
- Max. Expansion Module 16 slots
- Max Length Bus Line 60m between nodes, total length 200m
- Baud Rate 100Mbps, 100BASE-TX, Full duplex
- Interface Connector RJ-45 socket * 3pcs
- Ethernet Port Ethernet port for MODBUS/TCP, Webserver or IAP Mode
- Ethernet Default Setting Default IP Address : 192.168.100.100
- Default Domain name : gl9041.com (for Webserver)
- IAP Mode When DIP Switch 10 setting is On (Fixed IP Address : 192.168.100.100)
- Indicator 4 LEDs; 1 Green/Red, Module Status (MOD); 1 Green, Communication Status (RUN); 1 Red, Error Status (ERR); 1 Green/Red, Expansion Module Status (IOS)
- Current for I/O Module 1.0A @ 5Vdc